Cookie - It’s All Good.com
QuickMenu

RC Setups

Corally C4.1

Index

Here is my Corally C4.1 setup from August 2002 at TFTR

Front Rear
Shocks Tamiya alloy threaded Tamiya alloy threaded
Oil 20 weight 20 weight
Piston 2 hole 3 hole
Spring Tamiya Blue or White Tamiya Blue
Top shock mount 2nd hole in* 2nd hole in
Bottom shock mount lower custom bracket**
Castor medium spacer @ back -----
Toe 0.5 deg out 3 deg in
Camber 0 deg -0.5 deg
One-way Yes - diff Yes - loose
Pulleys (layshaft) 17 tooth 17 tooth
Ride height 5.5mm 5.5mm
Droop 2mm 2mm
Anti-squat ----- 3 degrees
Sway bars No No
Tyres Takeoff CS27s Takeoff CS27s
Inserts Takeoff M or HPI red Takeoff M or HPI red
Rims Proline Velocity Proline Velocity
    Motor:
  • Corally 12S
  • Orion Core 12D
  • 35 pinion (64 pitch)
  • 120 spur (64 pitch)
  • Roll out: 30.69mm (starting point)
  • Corally Q brushes
  • Fantom F321 brushes (less run time)

    Electrics:
  • Corally 3000HV Sanyo
  • Fantom 3000HV Sanyo
  • Corally, Fantom and Orion motors
  • Novak TC2 speedcontroller
  • Novak XXTra synthesized receiver
  • KO 2143 Digital 6V Fet servo
  • 14 gauge black silicone wiring

    Other:
  • Protoform Stratus shell
  • Tyres: Take Off CS - Cold=22 - Warm=22,27
  • Tyres: Sorex - Hot=32
  • Titanium screw kit
  • Titanium turnbuckles
  • Titanium wheels screws
  • Titanium pivot balls
  • Standard solid top deck
  • Custom made 2.5mm dia. sway bars front and rear
  • * Custom front tower (uses rear tower with mounting section trimmed)
  • ** Custom rear lower shock mount to move shocks further out on the arm

   Visit: Hobby Express - products available through your local hobby shop