Cookie - It’s All Good.com
QuickMenu

RC Setups

Corally C4.1

Index

Here is my Corally C4.1 setup that I used
at the Masters, Ryde 2002

I would only consider this a starting point, not really the ultimate setup!

Front Rear
Shocks plastic (short) alloy (long)
Oil 40 weight 40 weight
Piston 2 hole 3 hole
Spring Orange White
Top shock mount 2nd hole in* 3rd hole in
Bottom shock mount lower inside arm
Castor thinnest spacer @ front -----
Toe 0.5 deg out 2.5 deg in
Camber -1.5 deg -2 deg
One-way Yes - diff Pulley locked
Pulleys (layshaft) 17 tooth 17 tooth
Ride height 5mm 5.5mm
Droop 3mm 3mm
Anti-squat ----- 3 degrees
Sway bars No No
Tyres Proline Purple Proline Purple
Rims Proline Velocity Proline Velocity
    Motor:
  • Corally 8S
  • Roll out: 20.3mm
  • Corally Q brushes

    Electrics:
  • Fantom 3000HV Sanyo
  • Corally 3000HV Sanyo
  • Novak GT7 speedcontroller
  • Novak XXTra synthesized receiver
  • KO 2143 Digital 6V Fet servo
  • 14 gauge black silicone wiring

    Other:
  • Protoform or HPI Stratus shell
  • Aluminium CVDs
  • Titanium screw kit
  • Titanium turnbuckles
  • Titanium wheel screws
  • Aluminium pivot balls
  • Standard solid top deck
  • *Custom front tower (uses rear tower with mounting section trimmed)

   Visit: Hobby Express - products available through your local hobby shop